The solid wood is noble and noble, the panel furniture is novel and fashionable, and it enters the dazzling furniture market. It makes it difficult for you to choose between solid wood furniture and panel furniture, but the types of pure solid wood and imitation wood make you feel puzzled. How are solid wood furniture and panel furniture defined, what are their advantages and disadvantages? How to identify them and buy wooden furniture? Define the method of reclaiming to determine the value Solid wood furniture refers to furniture made of natural wood. The surface of such furniture can generally see the beautiful patterns of wood. Furniture manufacturers generally pay attention to the varnish or matt lacquer for solid wood furniture to express the natural color of the wood. One is pure solid wood furniture. That is to say, all the materials of the furniture are solid wood, including the table top, the door panel of the wardrobe, the side panels, etc. are all made of pure solid wood, and no other type of artificial board is used. Pure solid wood furniture has high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing, seaming and other requirements are very strict. If any process is not tight, small cracking, loose joints, etc., the whole set of furniture is deformed, so that it can not be used. The other is imitation solid wood furniture. The so-called imitation solid wood furniture, from the appearance of the solid wood furniture, the natural texture, feel and color of the wood are exactly the same as the solid wood furniture, but in fact the furniture mixed with solid wood and wood-based panels. Panel furniture refers to furniture made by medium-density fiberboard or particleboard surface veneering. A large part of this type of furniture is wood grain simulation furniture. The veneer of some panel furniture sold on the market is more and more realistic, the gloss and feel are good, and the products with fine craftsmanship are also very expensive. Identify wood grain and knots to identify solid wood How to overcome the shortcomings in solid wood and panel furniture? The easiest way is to buy products from famous manufacturers. The products of excellent manufacturers often carry out strict drying treatment on solid wood furniture, so that the moisture content of wood is kept within a limited range. Such furniture is not easy to be deformed, and the after-sales service is guaranteed. In addition, famous manufacturers use plate materials that meet environmental protection requirements for panel furniture, and most of the veneers are well treated. Good edge sealing makes the gas diffusion of panel furniture reach a minimum level, which does not cause any damage to the human body. Consumers should pay attention when purchasing. You can open the door or drawer to smell it. If there is a strong irritating smell, most of the formaldehyde is too high and should not be purchased. The quality of the process, the price of solid wood directly affects the price of solid wood furniture. Therefore, to choose solid wood furniture, we must first look at the material. For example, mahogany, the price of different tree species is different. The higher the grade of solid wood used and the better the process, the higher the price of furniture. Generally speaking, in terms of price, the price of the same kind of wood, all solid wood furniture is much higher than the price of furniture combined with imitation wood and wood-based panels. However, the price of some plate furniture with excellent workmanship and novel style may far exceed the price of solid wood furniture with rough workmanship. How to identify whether a door panel or partition is made of solid wood? The key lies in the wood grain and the knot, which is the method disclosed by the industry to identify whether it is a piece of solid wood. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side. In addition, there is a small trick to identify the panel furniture, which is to carefully observe the hinge groove and the eye-opening area, and expose the internal structure, so it can be seen whether the particle board or the medium density board is used. Tattoo Choker is one handmade weaved stretch Necklace. Tattoo choker is loved by 90s young people as it is Light, Elastic and delicate. when we wear it, it looks like tattoo, so it called tattoo choker. Of course, we also produce other match products, like tattoo Bracelet and tattoo ring to meet tattoo choker set. Tattoo choker also has many different colors, you can pick color to wear, also you can wear multi colors on once. Tattoo Choker Tattoo Choker,Tattoo Choker Diy,Black Tattoo Choker,Tattoo Choker Necklace YIWU DSHINE JEWELRY CO.,LTD , http://www.dshinejewelry.com
At present, the tattoo choker include many designs, like pendant tattoo choker, daisy tattoo choker, crystal tattoo choker, letters tattoo choker, beads tattoo choker etc.. Also there are many tattoo stickers make to tattoo choker.